Vital Statistics Sun Lounger

;■■( ' I-

TYPE: Lounge chair

OVERALL SIZE: 24W by 803/4l by I4V2H (38H with the back raised) MATERIAL Cedar, hardwood dowel

JOINERY: Butt joints reinforced with galvanized deck screws, stainless-steel bolts, washers and nuts

CONSTRUCTION DETAILS:

■ Back rest adjusts to four positions by means of a pivoting back brace

■ Foot rest is adjustable or removable

FINISH!NG OPTIONS: Penetrating UV protectant sealer, exterior paint or leave unfinished to weather naturally to gray

Building time

»/> PREPARING STOCK 0 hours

CUTTING PARTS 3-4 hours jQ

FINISHING 2-3 hours

TOTAL: 10-15 hours

Tools you'll use

Circular saw, power miter saw or radial-arm saw

Router with V2-in. roundover bit, 3/4-in. core box bit

Jig saw

Drill/driver

Clamps

Sockets

Combination square Bevel gauge

Shopping list

□ UV protectant sealer

Table Saw Sled Plans Free

Sun Lounger

1/2"-rad. rounded over edges, all top edges of slats

3/&"-dia. x3Vz" stainless-steel bolts, washers, and lock nuts,

3" galvanized deck screws, typ.

#6d galvanized nails for 1"-dia. dowel (M), #4d galvanized nails for 3/4"-dia. dowel (I)

21/2" galvanized deck screws, typ.

2V2" galvanized deck screws, typ.

1"-dia. x 3/s"-deep bolt head counterbore holes, typ.

2V2" galvanized deck screws, typ.

1 ' , I | . . :,.

Sun Lounger Cutting List

Part

A. Seat rails

No. Size

2 IV2 x 3V2 x 56V4 in.

Material Part

Cedar H. Adjustment dowel

No. Size Material

1 3/4 in. dia. x 133/4 in. Hardwood

B. Legs

6

IV2 x 3V2 x 13 in.

1. Back rest dowel

1

1 in. dia. x 241/2 in.

C. Seat stretchers

2

IV2 x 3 V2 x 18 in.

J. Foot rest rails

2

1V2 x 3V2 x.271/2 in. Cedar

D. Back supports

2

1V2 x 3V'2 x 46 in.

K. Leg stops

2

11/2 X 31/2 X 13/4 in. "

E. Slats

19

1-1/2 x 31/2 x 24 in.

L. Foot rest stretcher

1

11/2 x 31/2 x 147/8 in.

F. Back rails

2

11/2x31/2x31 in.

M. Foot rest dowel

1

1 in. dia. x 24V2 in. Hardwood

6. Adjustment braces

2

IV2 x IV2 x I6V2 in.

6"

191/2"

Was this article helpful?

0 -1

Post a comment