Info

The author's version of the Stickley leg Is made up of four identical pieces. The edge profile on each piece mates with the face profile on an adjacent piece.

STtCKLEY METHOD

On original Stickley pieces, the leg was made up of four pieces. Each of these pieces had two complementary profiles cut into it using two shaper setups.

AUTHOR'S VERSION

The author's version of the Stickley leg Is made up of four identical pieces. The edge profile on each piece mates with the face profile on an adjacent piece.

FREAK OF NATURE? No, just a bit of technical wizardry. Quartersawn figure occurs naturally only on opposing faces of a board, but the legs on many Craftsman pieces show it all around. The author used one router bit and two jigs to make the leg shown at left.

First Jig, First Pass

One jig positions workpiece flat on table to cut the profile on edge of stock.

rides r or fence rides r or fence

Inside edge against shape router-table

Offset between two pieces of plywood is width of leg.

Inside edge against shape router-table

Offset between two pieces of plywood is width of leg.

Wood Working 101

Wood Working 101

Have you ever wanted to begin woodworking at home? Woodworking can be a fun, yet dangerous experience if not performed properly. In The Art of Woodworking Beginners Guide, we will show you how to choose everything from saws to hand tools and how to use them properly to avoid ending up in the ER.

Get My Free Ebook


Post a comment