% In. "
Figureetght clips secure top to case. The clips are mortised into the rails ail around so the top sits flush with the case.
tenons at each end and routed -in.-long slots in the outer tenons.
I glued and damped the breadboard ends to the top next see the left photo on p. 90 . When you glue the ends on. make sure you have the same r< v» il ai both edgi s of" the top ind that the ends pull in at then centers. Have long ciamps ready to apply pressut - >t suit s i I t!ie top, and m ik sure the ends don't defied under clamping pressure. If you don't have long enough clamps, threaded couplers can connect lengths of pipe clamp.
Was this article helpful?
Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.