Info

Screws hold end cap in place. Screw in workpiece is positioned out of the way of the bit.

ROUT THE EDGE PROFILE FIRST. Maintain a steady feed rate, and keep pressure against the fence. Each profile is cut in a single pass.

ROUT THE EDGE PROFILE FIRST. Maintain a steady feed rate, and keep pressure against the fence. Each profile is cut in a single pass.

Second Jig, Second Pass

Second jig positions workpiece vertically to cut the profile on the inside face.

Profile cut in fi rst pass

Plywood pieces flush at edge

Profile cut in fi rst pass

Plywood pieces flush at edge

/

The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook


Post a comment