Two Quick Assembly Tips

When adding the last plate to each post, I used two common tricks. First, to keep the piece from sliding around on the glue, I added brads with their heads snipped off (left photo). Then to clamp the plate in place, I clamped temporary cleats across the post (right photo).

When adding the last plate to each post, I used two common tricks. First, to keep the piece from sliding around on the glue, I added brads with their heads snipped off (left photo). Then to clamp the plate in place, I clamped temporary cleats across the post (right photo).

Was this article helpful?

0 0

Post a comment