Info

Adjustable blowers are best because they can be set to blow the dust away from the operator Fixed blowers are often ineffective because they're positioned too far from the blade.

^ LOWER ARM

^ LOWER ARM

A shroud enclosing the area beneath the table provides the best dust collection. The Dremel (shown here) and Delta's 40-570 both feature shrouded dust collection. Dust collection on scrolisaws keeps the area under the table clear of dust and debris, but you still need a mask and a dust blower to deal with the dust that accumulates on the workpiece.

A shroud enclosing the area beneath the table provides the best dust collection. The Dremel (shown here) and Delta's 40-570 both feature shrouded dust collection. Dust collection on scrolisaws keeps the area under the table clear of dust and debris, but you still need a mask and a dust blower to deal with the dust that accumulates on the workpiece.

We liked the positive 90-degree stop and easy-to-read scale on the Craftsman table-tilting mechanism. A table that tilts 45 degrees one way and at least IS degrees the other allows you to cut dovetails.

periods, to enjoy scrollsawing. Having to reach to the back of the saw to tension your blade is especially difficult in the seated position. And fumbling around under the table to adjust speed or find the power switch is a hassle for everyone.

Electronic Variable Speed

Electronic variable speed is a must. Simply turning a knob to vary speed sure beats manually moving a belt around on a set of pulleys.

The ability to instantly slow the cutting speed to negotiate tight curves is a real plus. Also, non-wood materials like metal, plastic and thin veneers cut better at slower speeds. And you'll appreciate the higher speed capability when it comes to cutting patterns in 3/4-tn. hardwood.

Adjustable Dust Blowers

Scrolisaws come equipped with either fixed or adjustable blowers. Adjustable blowers are our favorite because they can be set in almost any position to maximize dust removal (Photo 9). Nothing is worse than having to huff and puff to clear a path in the sawdust as you cut. Most fixed blowers require a wrench to adjust or are permanently set so the dust is blown back at the operator. Blowers get their air from a bellows that's pumped by the up and down action of the saw arm.

Dust Collection

It's not easy to collect dust from a scrollsaw, which is why ihey all come with blowers. The Delta 40-570 and the Dremel have the most effective dust collection. Both saws concentrate the vacuum's power with a shroud that encloses the blade area under the table (Photo 10). But plenty of dust still accumulates on the workpiece and the top of the table, as you saw. In general, dust collection on these saws helps with the housekeeping, but don't put away your dust masks.

Tilting Tables

We i ike tables with a positive stop at 90 degrees because manually squaring the table can be a hassle (Photo 11). Scrollers tilt the table to create a host of special effects like incised lettering! sawing chamfers, inlays and marquetry. A table that tilts 45 degrees one way and at least 15 degrees the other allows you to cul dovetails on your scrollsaw,

Was this article helpful?

0 0
A Course In Wood Turning

A Course In Wood Turning

Ever wondered what wood turning is all about? Here are some invaluable information on how to make beautiful items out of wood! That one little strategy from A Course In Wood Turning that I implemented not only worked, but the results were completely astonishing. I had never seen anything like it! Now, keep in mind that I had tried a lot of other products up until this point. You name it, I probably tried it! That’s how desperate I was to improve my skills with wood turning.

Get My Free Ebook


Post a comment