Fan Pattern

2 Spray the back, overlapping each pass by 50 percent. Position the edge of the fan pattern to just reach the inside corners. Do not spray directly into the corner or finish will pool and create runs. Whenever possible, remove the back and finish separately.

3Spray the sides, moving from back to front.

4Spray the bottom from back to front. This is the most visible part of the cabinet interior. Spraying here last covers any overspray from the previous steps.

Was this article helpful?

0 0
The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook


Post a comment