Back

Va" x 4" x5V2" (Masonite)

rabbet

Hacksaw -blade

hole) in the bottom, see Fig. 13. This hole blade to act as a paper "cutter," see Fig. 14. allows you to get a finger behind the sand-Then drill a hole in each side for the toilet paper when tearing off a piece. paper holder, see Fig. 15.

Next, cut a recess in the bottom edge of After the holes are drilled, the dispenser the door for a short length of a hacksaw can be glued and nailed together.

Vs" chamfer on all front edges

Cut recess on back edge as deep as thickness of blade

Vs" chamfer on all front edges

Cut recess on back edge as deep as thickness of blade

Short length of hacksaw blade

Short length of hacksaw blade

#4x3/s"Fh Woodscrew
Drii. hole V deep to fit toilet paper holder

3A" rabbet, 3/s" deep

#6x 1" Fh Woodscrew

Was this article helpful?

0 0

Post a comment