Info

{

BACK TOP/MIDDLE

rail

BACK TOP/MIDDLE

rail

NOTE: All frame parts are %"-thick stock. Panels are Vh" plywood

ASSEMBLY. At this point, the side and back assemblies can be glued together. There are just a couple of things to point out here. First, it's a good idea to glue the back to one side at a time. This will help you keep a square assembly. Then I used plenty of clamps to make sure the joint line between the sections was tight and gap-free.

NOTE: All frame parts are %"-thick stock. Panels are Vh" plywood

back bottom rail

Was this article helpful?

0 0

Post a comment