Cutting Tenons On A Radialarm

With the workpiece butted against an end stop clamped to the fence, make the first cut along the shoulder line. Slide the work sideways, removing the waste little by little with successive crosscuts. Turn the work over and repeat the procedure to cut the other side of the tenon.

Joints For Coach Building Wooden Frames

screw stop to backing panel to support workpiece wing nuts and washers

Backing Panel

panel slide to sub-base glue hardwood slides to sub-base coach bolts machine slots for bolts, and grooves for hardwood slioes in underside of base slide to sub-base screw stop to backing panel to support workpiece wing nuts and washers glue hardwood slides to sub-base coach bolts panel

Chapter 2 0 Traditional drawer making utilizes the inherent strength of the dovetail j oint to full advantage: the fan-shape 'tails' resist the forces applied to the joints when the drawer is used. Dovetails are so strong that it is rare to see a drawer that has broken

┬┐IS 9, result of joint failure, even when heavily laden. There is a great variety of forms of dovetail joints, some of which are used primarily for their decorative qualities.

Was this article helpful?

0 0
The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook


Post a comment