Magnetic Catch

B 2 Cabinet End 3/4" x 4-3/4" x 17-114" F 4 Inner Door End 3/4" x 4-3/4" x 8-5/8"

C I Cabinet Back 3/4" x 17-114" x 23-114" G 2 Inner Door Divider 3/4" x 8-112" x 23-112"

D 3 Shelf 3/4"x4-l/2"x 16-1/2" H 2 Outer Door Side 3/4" x 2-3/4" x 24"

Pantry Door Tool Cabinet

Inspired by the pantry cabinet in the kitchen of our new house, I built this compact version for my workshop. It has the same deep double-hinged doors that make everything inside easy to reach. I used 3/4-in.-thick stock so I could use screws to hang tools inside. The thick back made it easy to fasten the cabinet to the wall.

I used less than a sheet of 3/4-in.-thick plywood and two 4-ft.-long continuous hinges to build my cabinet. I got everything I needed at the local home center. Including the latch and magnetic catches, my total cost was $75.

Ernest Blair

Name_Dimensions

Number Name Dimensions Part Number

2 Cabinet Side 3/4" x 4-3/4" x 24" E 2

Overall Dimensions: 12-5/8" x 18" x 24"

3/4" x 2-3/4" x 8-5/8" 3/4" x 9" x 24"

See"Giant

Part

J_4_Outer Door End

K 2 Outer Door Face

1/4" ROUNDOVER

Shop Cabinet" (AW #91, December 2001) for a colossal floor-standing version of this cabinet!

0 0

Post a comment