First Dado

Cut a second dado in Piece A after rotating it one-quarter turn toward the dado set and re-installing it with one spacer at each end.

REPOSITIONED * TOGGLE CLAMP

Cut a 3/8" by 3/8" dado after clamping the stop blocks in position and installing Piece A with both spacers to the left.

Use the opposite side of the jig to cut 3/4" wide dadoes in Pieces B and C.Cut the first dado, rotate each piece one-quarter turn toward the dado set, and then cut a second dado. Make these cuts with one spacer installed at each end.

Was this article helpful?

0 0

Post a comment