Copyrighted material

scroll saw pattern scroll saw pattern

Scrollwork Patterns

60DY ACTUAL SIZE

MAKE 1 3/4" thick wood

REAR LEG ACTUAL SIZE

MAKE 2 1.2- ChtCk wood

60DY ACTUAL SIZE

MAKE 1 3/4" thick wood

REAR LEG ACTUAL SIZE

MAKE 2 1.2- ChtCk wood

Scroll Saw Toy Plans

1. Apply a thin, even coal of spray mount to toy pattern. Let the glue dry to a tacky state before applying pattern to the wood Press onto wood

2 Carefully cut out pattern with your scroll saw Repeat Steps 1 and 2 for all body parts Sand lightly w>th 100 gilt sandpaper to soften edges.

3. Apply glue to the contact surface of a front leg. Press part down and slide around on the body to spread glue evenly. Press firmly into place. Let dry thoroughly before proceeding to next step.

4. Repeat Stop 3 to attach the roar leg to the body. Line up bottom of feet evenly with the table top to level the toy Squeeze leg onto body and hold in place against table top until glue sets up.

5 Repeat Step 3 to attach the second front leg to the opposite side of the body Squeeze front leg onto body and hold in place until glue sets up Let dry thoroughly before proceeding to next step.

6. Repeat Step 3 to attach the second rear leg to the opposite side of the body. Line up feet even with the tabic top to level the toy Squeeze leg onto body arid hoW in pSace against table top until glue sets up.

92009 John W Lwman

Was this article helpful?

0 0
The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook


Post a comment