Scroll saw pattern

For (teteted toy assembly ups refer (o the Ter/ Wizard Tips secuonofthe book.

Wood Donkey Cut Out Bandsaw

BOTTOM LAYER INO INNER CUT OUT) ACTUAL SIZE

Wood Scroll Designs

BOTTOM LAYER INO INNER CUT OUT) ACTUAL SIZE

Cut Out Repeated Patterns

2. Carefully cut out pattern with your scroll saw Repeat Steps 1 and 2 for all toy parts. Sand lightly with 100 grit sandpaper to soften edges.

1 Apply a thin, even coat of spray mount to toy pattern. Let the glue dry to a tacky state before applying pattern to the wood Press onto wood

5. You can finish the watering hole by staining the wood or painting wtfh acrylics. If you want to seal the toy so it can be filled with water apply a final coat of clear polyurethane found at any home improvement store Not for children under 3 yrs page 103 ©2008 John W U»*tnan

Was this article helpful?

0 0
The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook


Post a comment