Scroll saw pattern

FRONT LEG

ISIOE A) ACTUAL SIZE

MAKE 1 112" thick wood

FRONT LEG

ISIOE B) ACTUAL SIZE

MAKE 1 1124 thick wood

Wood Scroll Saw

1. Apply a thin, oven coat of spray mount to toy pattern Let the glue dry to tacky before applying pattern to wood Press onto wood

For delated toy assembly hps rater to Me Toy Wizard TYps section oftfte book.

1. Apply a thin, oven coat of spray mount to toy pattern Let the glue dry to tacky before applying pattern to wood Press onto wood

Hernando SotoEaster Scroll Saw Cut Outs

2. Carefully cut out pattern with your scroll saw. Repeat Steps 1 and 2 for all body parts. Sand lightly with 100 grit sandpaper to soften edges

Dage a? G20Q9 John W Lawman

Copyrighted material

4. Apply glue to tho contact surface of front leg (side A). Press part down and slide around on the body to spread glue evenly. Press firmly into place. Lot dry thoroughly before repeating this step for gluing the rear leg (side A). Level the rear leg (foot) against a taWe top. Let dry.

3 Apply glue to contact surface of one body side. Press part dcr*Ti and spread glue evenly. Press firmly into place. Let dry before gluing the second body s*Je Let diy Dnll a 1 jB' hole for the eye of paml the eye on both sides of tho toy when finished.

Scroll Saw Patterns

Was this article helpful?

0 0
The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook


Post a comment