How it works
Every unit hangs on a simple hook-and-slat system,The hooks are composed of two pieces of multiply birch plywood, glued together, as are the slats. After gluing the slats, shave 1/32" off the inside face of the 3/4" plywood piece using a router table or dado set. Removing this material allows the hooks to drop into the slats without binding.
All of these units are built from multiply plywood of various thicknesses, Make the 1" thick parts by gluing together two pieces of plywood. Some units are nailed and glued together; those that need more strength are screwed and glued.
Was this article helpful?
Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.