Notch edging to fit rabbet.
Edging overlaps hinge side of cabinet
Nail base frame to bottom, gluing only along front edge of frame.
Bevel back panel to fit grooves in top and sides.
Stop top dado lA in. from rabbet Stop other dados 7/fe in. from rabbet
Cut to-in. bead on edge.
Rabbet back of fascia to fit top opening in cabinet See detail below.
FASCIA 1 x 2sAs x 131/2
Cut M x 3/fc-deep groove in top and sides.
Cut A x /J2 rabbet for door hinge side
Was this article helpful?