How To Build Raised Panel Cabinet Doors Using Only A Tablesaw

It's The World's Only Pneumatic Brad nailer Pneumatic. Cordless. Our new cordless brad nailer gives you the option of both, using exclusive TPS Technology (Twin Power Source System). It's pneumatic, courtesy of a 1 4 valve that allows you to use it with traditional compressors. It's also cordless, thanks to a mini-compressor powered by our rechargeable, interchangeable 12-volt battery. To get one of your own,visit your Porter-Cable dealer or call 1-800-487-8665 (519-836-2840 in Canada). ART...

Make Coved Panels With Table

Stock Fences are More Accurate and Reliable Whatever brand of contractor s saw you buy, chances are you'll get a decent fence. Gone are the days when you had to measure from the blade to the fence and bang the fence into alignment for every cut. Good riddance Most contractor's saws now come with accurate and reliable fences. This is terrific news Great fences such as the Biesemeyer, Vega and Unifence have been around for a while, but they were only available on expensive cabinet saws or as...

Bridgewood

Precision Miter Gauge

Precision Miter Gauge at a Great Price Unlike aftermarket miter gauges with stops at every angle (and prices well over 100), Woodhaven's new miter gauge has only two stops at 90 degrees and at 45 degrees left and right. But it's machined to cut all three angles perfectly, and it costs only 60. The Woodhaven isn't meant to replace your stock gauge. Instead, you'll use both of them the Woodhaven for square and miter cuts and your stock gauge for all other angles. It's a great you'll make on your...

Rainhandler

AW0802 2710 North Avenue Bridgeport, CT 06604 1 -800-942-3004 Fax 1-800-606-2028 I hate fumbling around in drawers or digging into cabinets for tools. That's why I love perf-board. ft displays my hand tools out in the open where I can grab them the instant I need them. But, rather than having one big piece of perf-board in one location, I cut the stuff up and hang it wherever I need it. On my workbench, for example, I found the perfect spot to hang some perf-board for...

Bench Top Mrtiser

Table Saw Station

Five inch head stroke with 1 2 chisel capacity Upper amp lower metal lock down stops are BULLETPROOF INCLUDES 3 CHISELS amp BITS 6-SPEED EASY ARC TILT TABLE 12 HEA VY DUTY DRILL PRESS 500-3100 RPM 1 3 HP motor Tilt table provides 225 of adjustability Positive stops at 180 amp 45 90 ball detent stop 4 x 36 sanding belt, 2000 SF M 6 sanding disk, 3100 RPM 5 1 2 x 81 2 adjustable work table 1 3 HP, 120V, induction motor Should I Run My Tablesaw on 120 or 240 Volts q My contractor's saw pops a...