Scroll saw pattern

Fur-S&e Scfo» Saw Pett^n* - Toy Oraoon*. Knight* and Fa«r Maiden*

W/vern Oagoo scroll saw pattern

Fur-S&e Scfo» Saw Pett^n* - Toy Oraoon*. Knight* and Fa«r Maiden*

W/vern Oagoo scroll saw pattern

Scroll Saw Patterns Knight

Fuf-Stfe Setol Saw Pattern • Toy Ora#>na. Knight* and Fair Maidtns

W/vern Crajjco

1. Apply a thin even coat of spray mount to toy pattern. Let the glue dry to a tacky state before applying pattern to the wood. Press onto wood.

2. Carefully cut out pattern with your scroti saw Repeat Steps 1 and 2 for all body parts Sand lightly with 100 grit sandpaper to soften edges.

Oriental Scroll Saw PatternStates Scroll Saw Patterns

scroll saw pattern

1. Apply a thin even coat of spray mount to toy pattern. Let the glue dry to a tacky state before applying pattern to the wood. Press onto wood.

2. Carefully cut out pattern with your scroti saw Repeat Steps 1 and 2 for all body parts Sand lightly with 100 grit sandpaper to soften edges.

Fuf-Stfe Setol Saw Pattern • Toy Ora#>na. Knight* and Fair Maidtns

W/vern Crajjco

3. Apply glue to the contact surface of one body side. Press part down and slide around on the body to spread glue evenly Press firmty into pJace. Let glue dry thoroughly befofe proceeding to next step

4. Repeat Step 3 to attach one leg to the body assembly Align bottom of feet evenly with the tabie top to level Refer to the dragon side view on page 23 for suggested placement of the legs Squeeze leg onto body and hold in place against tabte top until glue sets up.

5. Repeat Step 3 to attach the second body side to the body assemWy Squeeze parts and hold in place until glue sets up. Let glue dry thoroughly before proceeding to next step.

6. Repeat Step 3 to attach the wing to the dragon body assembly. Squeeze wing into body notch and hold in place until glue sets up. Let gKie dry thoroughly before proceeding to next step.

Fur-Size SCfOl' Saw P0ttlflW • Toy Omgons. Kniflht* end Fair Maiden W^vern Dragon

Fur-Size SCfOl' Saw P0ttlflW • Toy Omgons. Kniflht* end Fair Maiden W^vern Dragon

Scroll Saw Wings

7. Repeal Step 6 to attach the wring tips to the wing. Squeeze each wing tip into each wing notch and hoW in place until glue sets up. Let glue dry thoroughly before proceeding to next step

8. Repeat Step 4 to attach the second leg to the dragon assembly. Refer to the dragon side view on page 23 for suggested placement of the legs Squeeze leg onto body and hoM in place against table top until glue sets up

Marsupial Dragon

The Wyvern Dragon, looks great both" painted and unpainted. Fof,painting first apply * water based

* * enamel, sanding between coats lightly i ' with 250"grit paper.

p»gft 27 C*2010 John W Upfflttn

Fut-S^e Sctot Saw Palter* • To*/ Oranna. Kltight* and Fair Maldan*

Marsupial fragen

Repetitve Scoll Pattern Paper

FuI-Sgû Scro! Sasv Patterns - Toy Ora^Dns. Knlghls ard Fair Maldsre

Msusupal Orasen

FuI-Sgû Scro! Sasv Patterns - Toy Ora^Dns. Knlghls ard Fair Maldsre

Msusupal Orasen rá

scroll saw pattern

The Marsupial dragon name is due to its resemblance to the kangaroo. Although they have four legs, the back legs are large like a kangaroo s.

The Marsupial hops on the hind legs like a kangaroo They also have a pouch on their abdomen as does the kangaroo. The Marsupial has a pronounced wing along its back but it can not fly. The Marsupial is very rare but is believed to live in Australia in the Blue Mountain eucalypt forests in remote rocky caves They attack with their fire breath, lashing tail and by kicking their strong lower legs The Marsupial can grow to be 25 ft long and 17 ft tall and has been known to live to be around 100 years in age

Pattern For Toy Wooden Dragon With Wings

MARSUPIAL DRAGON TOY ACTUAL SIZE

Fut-S^e Scrot Saw Patterns • Toy Ora#>ns. Knights and Fair Maiden*

Marsupial Crajjco

Fut-S^e Scrot Saw Patterns • Toy Ora#>ns. Knights and Fair Maiden*

Marsupial Crajjco

ft scroll saw pattern

WING ACTUAL SIZE

FRONT LEG

(SIDE 8| ACTUAL SIZE

WAKE 1 1/2" thick wood

FRONT LEG

(SIDE 8| ACTUAL SIZE

WAKE 1 1/2" thick wood

Pattern For Toy Wooden Dragon With Wings

WING ACTUAL SIZE

Ful-Sco Sero! Sasv Patterns - Toy Dragona Knights ard Fair Maidens

Maftwpial Dragco

Ful-Sco Sero! Sasv Patterns - Toy Dragona Knights ard Fair Maidens

Maftwpial Dragco

Scroll Saw Patterns Pennslvania
pa-gft 31

Copyrighted materu

6. Repeat Step 4 to attach the side B front leg and the second wing and eyebrow to the body assembly.

Scroll Saw Patterns WingsScroll Saw
Fuf-Si« Scrot Saw Pa(te«ns • Toy Ora#>na. Knighte and Fa»r Maiden» Marsupial Crasc<i

scroll saw pattern

1. Apply a thin, even coat of spray mount to toy pattern. Let the glue dry to a tacky state before applying pattern to the wood. Press onto wood.

2. Carefully cut out pattern with your scroll saw Repeat Steps 1 and 2 for all body parts Sand lightly with 100 grit sandpaper to soften edges.

3. Apply glue to the contact surface of one outside body. Press part down and slide around on the inside body to spread glue evenly Press firmly into ptece. Let gkie diy Ihoroughly before proceeding to next step n

5. Flip toy to opposite side Repeat Step 3 and attach the second outside body pari to the inside body. HoSd assembly in place until glue sets up.

6. Repeat Step 4 to attach the side B front leg and the second wing and eyebrow to the body assembly.

4. Repeat Step 3 to attach the side A front and rear tegs and a wing and eyebrow to the dragon body assembly Refer to the dragon side view on page 29 for placement of the legs Squeeze parts onto body and hold in place against table top to level toy until glue sets up

8. Trie Marsupial Dragon looks great both painted and unpainted. For painting first apply 3 coats water based enamel, sanding between coats lightly with 200 gnt paper

Scroll Saw Pattern Knight

Fut-Sc?c Ecfot Saw Pattern - Toy Dragons. Knights and Fair Maidens

Maraupal Dragon

Copyrighted material

Fut-Sc?c Ecfot Saw Pattern - Toy Dragons. Knights and Fair Maidens

Maraupal Dragon scroll saw pattern

8. Trie Marsupial Dragon looks great both painted and unpainted. For painting first apply 3 coats water based enamel, sanding between coats lightly with 200 gnt paper

7. Repeat Step 4 to attach the side B rear leg to the dragon. AJign bottom of feet evenfy with the table top to level. Squeeze legs onto belty and how in ptece against taWe tcp until giue sets up.

FScrol Saw Palte-rs • Toy Or&gone. Knighto and Fa»r Maklen* □-

B-ave Knghi

Knight Tale Scroll

Fui Si7û Toy Patterns - Oragons. Knights arid Fair Maidens

Brave Khght

scroll saw pattern

Scroll Saw Navy PatternsScroll Saw Medevil Patterns

BRAVE KNIGHT TOY ACTUAL SIZE

Medieval Knights protected the weak and helpless and fought for their Kingdom with honor These few guidelines were the main duties of a Medieval Knight. Knights were well trained in hunting, fighting, and riding and in practicing courteous, honorable behavior Knights also practiced Chivalry The word Chivalry was derived from the French word chevalier implying 'skills to handle a horse1. Chivalry guided a Knight s life style It included codes for military, social life, and religion. Knights displayed military chivalry with expensive, heavy weaponry, a stable of fine horses and flying colored banners to display power and to distinguish themselves in battle and in jousting tournaments.

Fut Sire Scroll Saw Patterns - Ofaj^ns. Knights arxi Fair Maidens fc'ave Kngtt scroll saw pattern

Fa tteiaiizd toy assem tsy bps refer !o the ToymMng T*ps secton of (ho book

Fut Sire Scroll Saw Patterns - Ofaj^ns. Knights arxi Fair Maidens fc'ave Kngtt

Fa tteiaiizd toy assem tsy bps refer !o the ToymMng T*ps secton of (ho book

Knight Scroll Saw

Ful S\ZQ ScrcJI Saw Pattarns - Oranna. Knights and Fair Vlattens

Brave Knght a scroll saw pattern a

BODY ACTUAL SIZE

MAKE 1 718- thick wood cut from 2x4

SWORO ACTUAL SIZE MAKE 1 1i4" D1A. DOWEL

(FLATTEN EACH SIOE OF THE SWORO OOWEL

WITH A BLOCK Of SANDPAPCR TO MAKE SWORD BLADE)

1.i4" hole tftfu fOf flHijSUlf

LEG ACTUAL SIZE

MAKE 2 1 tt* thick wood

FLAGSTAFF ACTUAL SIZE MAKE 1 1'4- OIA. OOWEL

FLAG ACTUAL SIZE

MAKE 1 1i*2- thick wood

a pogo 37

<22010 ¿ohn W Uvvman

1i4- hole thru lor llagstafl

1J4- hole X VZ" DEEP for sword

ARM ACTUAL SIZE MAKE 2

V2" thick wood

ARM ACTUAL SIZE MAKE 2

V2" thick wood

1i4- hole thru lor llagstafl

1J4- hole X VZ" DEEP for sword

Put Sure Scroti Saw Pattern • Ora^ns. Knighls and Fair Maidens Brave KngK

Squeezing Arm

5. Apply gkje to contact surface of remaining arm Squeeze arm tightly in place against txxfy. Hold assembly in place until glue sets up.

Put Sure Scroti Saw Pattern • Ora^ns. Knighls and Fair Maidens Brave KngK

scroll saw pattern

3. Apply glue to the contact surface of on© leg. Press part down and slide around on body to spread glue evenly Press firmly into ptece. Let glue dry thoroughly before proceeding to next step

2. Lay body of knight on side. Apply glue to contact surface of one arm. Squeeze arm against body and wait until glue sets up before proceeding.

4, Turn body of kr»ght to opposite side Apply gluo to one side of leg. Squeeze leg against body and wait until glue sets up before proceeding.

1. Apply a thin, even coat of spray mount to toy pattern. Let the glue dry to a tacky state before applying pattern to the wood Press onto wood. Carefully cut out patterns with your scrofl saw.

1. Apply a thin, even coat of spray mount to toy pattern. Let the glue dry to a tacky state before applying pattern to the wood Press onto wood. Carefully cut out patterns with your scrofl saw.

6. Apply glue to contact surface of arm where it meets shield Squeeze shield against arm tightly and let dry in place.

6. Apply glue to contact surface of arm where it meets shield Squeeze shield against arm tightly and let dry in place.

Ful Si7ö Scroll Saw Patterns - Oregons. Krauts and Fair Matdana

Brave Knghft

a scroll saw pattern

7. For Knights on foot glue longest flagstaff in place In hand-bole with flagstaff level with bottom of ieet For Knights on horseback glue short flagstaff in place in hand-hole alined with bottom of Kn»ght s hand

8. Glue sword in place in end of hand as shown in the illustrations below. A set of Knights with sv/ords. flagstaffs and shields plus a set without these accessones makes a versatile play set.

Knight Scroll Saw Patterns

Assembly for Knight on horseback

Assembly for foot soldiers.

Que Its-q in p'ac* on fksgrfaff.

Copyrighted material pttja 20

Assembly for Knight on foot

Fuf-Si« Sero* Saw Pattern • Toy Oranna. Krghla and Fair Maider« Mr Morae

Fuf-Si« Sero* Saw Pattern • Toy Oranna. Krghla and Fair Maider« Mr Morae

Kitchen Pattern Scroll Saw

Far-See Scfoi Saw Patton* • Toy Oranna. Knlflhte and Far Maiden*

War Morse

Far-See Scfoi Saw Patton* • Toy Oranna. Knlflhte and Far Maiden*

War Morse

Dragon Toy Scrill
pttjft 41

Fut Sire Scroll Saw Patterns - Otaj*>nKnights arxi Fair Maidens

Mr Horse

scroll saw pattern

For do*anted roy assemiiy Zips rfrfar to tho Toymzttfig Tips socivn of trie boa*

Scroll Saw Patterns Knights

For do*anted roy assemiiy Zips rfrfar to tho Toymzttfig Tips socivn of trie boa*

Scroll Saw Patterns Horses

Hidden page

6. Repeat Step 4 and attach the remaining rear leg (side B) In position on the body. Hold assembly in place tightly until the glue sets up. Add glue to end of eye peg. Press eye peg into eye hole.

4. Apply glue to the contact surface of rear leg (side A). Press part down and side around on the inside body to spcead glue evenly. Press firmly into place. Let glue dry thoroughly before procee<4ng.

Knights And Fair Maidens

Fu> Size Scrdl Saw Patterns • Ora¡*>ns. Knights and Fair Maiden» VYbr Horse

scroll saw pattern

1. Apply a thin, even coat of spray mount to toy pattern. Let the glue dry to a tacky state before applying pattern to the wood Press onto wood.

2. Carefully cut out pattern with your scroll saw Repeat Steps 1 and 2 for all body parts. Sand lightly with 100 grit sandpaper to soften edges.

4. Apply glue to the contact surface of rear leg (side A). Press part down and side around on the inside body to spcead glue evenly. Press firmly into place. Let glue dry thoroughly before procee<4ng.

5. Flip toy to opposite side Repeat Step 3 and attach the second front leg (side B) in position on the body. Hold assembly in place until glue sets up.

6. Repeat Step 4 and attach the remaining rear leg (side B) In position on the body. Hold assembly in place tightly until the glue sets up. Add glue to end of eye peg. Press eye peg into eye hole.

3. Apply glue to the contact surface of front log (side A). Press part down and slide around on the inside body to spread gkie evenly. Press firmly into pSace. Let gitie dry thoroughly and drill 1/8" eye hole before proceeding to next stop.

Ful Sua Scroll Saw Patterns - Oragons. Knijhts and Fair Matdenfi

Mr Horse

scroll saw pattern a

Scroll Saw Horse

The War Horse looks great both painted and unpainted For painting first apply 3 coats water based enamel, sanding between coats ightfy with 200 grit paper.

Was this article helpful?

+1 0
Wood Working for Amateur Craftsman

Wood Working for Amateur Craftsman

THIS book is one of the series of Handbooks on industrial subjects being published by the Popular Mechanics Company. Like Popular Mechanics Magazine, and like the other books in this series, it is written so you can understand it. The purpose of Popular Mechanics Handbooks is to supply a growing demand for high-class, up-to-date and accurate text-books, suitable for home study as well as for class use, on all mechanical subjects. The textand illustrations, in each instance, have been prepared expressly for this series by well known experts, and revised by the editor of Popular Mechanics.

Get My Free Ebook


Post a comment