— Drill bit same diameter as pull screwhead

Insert drawer pull screw

Getting dado blades to the correct widths can be frustrating as well as time-consuming. If the cut is not right, you have to take the stack apart and either add or take awa\ shims.

For the dividers in the Wine Rack on page 18,1 decided to set up the dado first. Once I got the notch right, I then simply planed the divider stock to the appropriate tliickness.

I found it much easier to make micro adjustments with my planer than having to add shims to my dado stack. But, remember, don't get

Divider stock

Divider Stock.

0 0

Post a comment